CORSAIR VENGEANCE RGB DDR5 memory delivers DDR5 performance, higher frequencies, and greater capacities optimized for Intel® motherboards while lighting up your PC with dynamic, individually addressable ten-zone RGB lighting.
It houses dual-tower fins and six heatpipes which transfer airflow efficiently through the push-fin heatsinks to provide mighty cooling capacity.
Powerful 4-Pole A-RGB Fan
Geared with 120mm RGB fans with PWM, features powerful (700-1800 RPM) fan speed and max 72CFM (ft3/min) airflow. PWM control highly matches system needs, for high performance in low noise.
Optimized Copper Coldplate
Using direct-contact technology of the copper base, which was made from the 6 heatpipes high-strength pressed into a flat panel for better heat conductive. A thermal paste is contained, please use it after removing the protective film of coldplate.
Advanced Fine Design
The dual-tower heatsink fins are designed in higher density and thicker aluminum material, delivering more efficient cooling performance. Covered with a PBT outer shell, block as much noise as possible.
Wide Compatibility
Standing 164mm high and includes both AMD/INTEL sturdy all-metal mounting brackets to safely fasten the CPU air cooler on multiple platforms including the latest Intel LGA 2066/2011v3/2011/1700/1200/1151/1150/1155 and AMD AM5/AM4.
Toughpower GF A3 series is 80 PLUS Gold certified and compatible with Intel’s ATX 3.0 specifications. Designed with a native PCIe Gen 5.0 connector, it can power up next-gen technology with one new 12VHPWR cable.
The wattage marked on the 12VHPWR’s connector is the recommended wattage. (Ref. Intel design guideline) The native 16 PIN (12VHPWR) PCIe connector of the GF A3 1050W can deliver up to 600W for PCIe 5.0 graphics cards.
Get equipped for supercharged gaming and creating with the NVIDIA® GeForce RTX™ 4070 SUPER. It’s built with the ultra-efficient NVIDIA Ada Lovelace architecture. Experience super fast ray tracing, AI-accelerated performance with DLSS 3, new ways to create, and much more.
SFF-Ready Enthusiast GeForce Card
Boost Clock / Memory Speed
2505 MHz / 21 Gbps
12GB GDDR6X
DisplayPort x 3 (v1.4a)
HDMI™ x 1 (Supports 4K@120Hz HDR, 8K@60Hz HDR, and Variable Refresh Rate as specified in HDMI™ 2.1a)
Dual Fan Thermal Design
TORX Fan 4.0: A masterpiece of teamwork, fan blades work in pairs to create unprecedented levels of focused air pressure.
Core Pipe: Precision-crafted heat pipes ensure max contact to the GPU and spread heat along the full length of the heatsink.
Zero Frozr: The fans completely stop when temperatures are relatively low, eliminating all noise.
Reinforcing Backplate
The reinforcing backplate features a flow-through design that provides additional ventilation.
MSI Center
The exclusive MSI Center software lets you monitor, tweak, and optimize MSI products in real-time.